Buffing TechniquesRSS Feed
Choosing the Correct Pad - Part VI
Posted by Jay Schneider. Filed under Buffing Techniques.
May 18, 2011
After you are done polishing, remove residues with a microfiber towel. Here is a hint: the shorter the knap length on the microfiber, the easier it is to remove the polish; the longer knap length may have a tendency to smear and not remove immediately.
After all is wiped off, make sure to clean pads to prevent cross contamination for the next use. Once pads are completely cleaned and dried, place them in either a closed container or Ziploc type bag to prevent contaminants from landing on the pads. Now go out and enjoy your shiny ride!
Products mentioned in this article: